eclat "Cortex" 2016 Freecoaster (01/2016)

This eclat "Cortex" 2016 Freecoaster was completely re-designed and tested by the eclat team riders through their paces. This freecoaster is equipped with a specially by eclat designed clutch system which promises reliable operation and long life. The driver is equipped with two sealed bearings and an additional polymer bushing and the clutch runs on a specially developed IOS-System by a into the clutch inserted spring and O-ring resistance mechanism accurately and without wear on the shaft. High quality sealed bearings and a heat treated 14mm CrMo hollow axle are designed for tough grind actions and the hub flanges are made extra strong. The gap of this eclat "Cortex" 2016 Freecoaster coincides with an almost 3/4 idle rotation deliberately very large but can be set individually by adding the supplied gap rings after removing the driver the axle and the non-drive side bearing. With the separately available eclat "Cortex" rear hubguard and eclat "Gong" drive side hubguard you can protect both flange sides of this eclat "Cortex" 2016 Freecoaster .

Facts: eclat "Cortex" 2016 Freecoaster

• Material:
  Shell: 6061-T6 / 7075-T6 aluminium, 36H
  Axle: 14mm Male, CrMo, heat treated, hollow with 6mm allen key insert
  Nuts: Aluminium, 17mm wrench or nut
  Cone: CrMo
• Driver: LHD 9T or RHD 9T
• Bearing: 2 x Sealed bearings
• Flange Diameter: Drive side: 58mm / Non-Drive Side: 48mm
• Compatible Hubguards: eclat "Cortex" rear hubguard, eclat "Gong" drive side hubguard