eclat "Cortex" 2018 Freecoaster (11/2016)

This eclat "Cortex" 2018 Freecoaster comes with some updates like 3 point internals and stopper ring on bearing and was tested by eclat team riders. The driver is equipped with two sealed bearings and an additional polymer bushing and the clutch runs on a specially developed IOS-System by a into the clutch inserted spring and O-ring resistance mechanism accurately and without wear on the shaft. The gap of this eclat "Cortex" 2018 Freecoaster coincides with an almost 3/4 idle rotation deliberately very large but can be set individually by adding the supplied gap rings after removing the driver the axle and the non-drive side bearing.