Reverse Components "Base" MTB Front Hub
- Weight : 0.21kg / 0.46lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 33112
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "Base" MTB Front Hub is the front hub of the Reverse Base series. Pick the axle standard above. The Multi-Use version is a 4 in 1 system, ships with 20 mm end caps and converts to a 5 mm quick release, 9 mm or 15 mm thru axle with the matching Reverse adapter set. The Super Boost version runs a fixed 20 x 110 mm and has the wider flange spacing, which makes the wheel stiffer laterally. Both hubs are machined from aluminium, run on sealed cartridge bearings and take the rotor on a 6-bolt mount.
Facts: Reverse Components "Base" MTB Front Hub
- Material: Aluminum
- Holes: 32H
- Axle Standard: Multi-Use 4 in 1 (20 x 110, 15 x 100, 9 x 100, 5 x 100 mm) or Super Boost 20 x 110 mm
- Disc Mount: 6-bolt
- Bearings: sealed (SB)
- Scope of Delivery: 1 piece
- Extras:
- Multi-Use: 2 sealed cartridge bearings (6804 2RS), supplied with 20 mm end caps
- the Multi-Use hub converts to a 5 mm quick release, 9 mm or 15 mm thru axle with the Reverse adapter set
- weight 186 g (Multi-Use), 208 g (Super Boost)
