Reverse Components "Base" MTB Headset Lower Cup - ZS56/30+40
-
Weight : 0.07kg / 0.15lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 33163
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "Base" MTB Headset Lower Cup - ZS56/30+40 is the lower half of the Base headset for frames with a 56 mm lower head tube. It takes both a 30 mm and a 40 mm crown race and both are included, so it runs on a 1 1/8 inch steerer fork just as well as on a 1.5 inch crown seat. The bearing is a sealed cartridge bearing.
Facts: Reverse Components "Base" MTB Headset Lower Cup - ZS56/30+40
- Material: Aluminum 7075
- Size: 1-1/8" - 1.5" (28.6mm - 38.1mm), ZS56/30+40 (semi integrated)
- Bearing: 1 sealed cartridge bearing
- Scope of Delivery: 1 headset lower cup, 1 crown race 1 1/8 inch, 1 crown race 1.5 inch
- Extras: 68 g, combines freely with any Base top cup
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
