Reverse Components "EVO-9" MTB Front Hub
-
Weight : 0.18kg / 0.4lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33113
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "EVO-9" MTB Front Hub is the front hub of the Reverse EVO-9 series. It uses the 4 in 1 system and therefore covers every common axle diameter. It ships with the 20-15-QR basic adapter, and the Reverse adapter kit converts it to a 5 mm quick release, 9 mm or 15 mm thru axle. Depending on the adapter it builds 100 or 110 mm wide. Two multi-sealed cartridge bearings keep dust and dirt out, the hub shell is machined from aluminium and anodised red.
Facts: Reverse Components "EVO-9" MTB Front Hub
- Material: Aluminum
- Holes: 32H
- Axle Standard: Multi-Use 4 in 1 (100 / 110 mm)
- Disc Mount: 6-bolt
- Bearings: sealed (SB)
- Scope of Delivery: 1 hub, 1 basic adapter 20-15-QR
- Extras:
- 2 multi-sealed cartridge bearings
- 100 or 110 mm width, depending on the adapter
- converts to a 5 mm quick release, 9 mm or 15 mm thru axle with the Reverse adapter kit
- weight 179 g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
