Sprockets Spare Parts
Is your sprocket wobbling, have you lost bolts, or is the plastic guard ground through? Here you will find adapter rings (hat washers) for axle mounting as well as model-specific replacement guards made of plastic for your sprocket. This way, you don't have to replace the entire drive unit when it wears out.
Sprockets Spare Parts FAQSprockets Spare Parts Range
Frequently compared
-
BSD "Barrier Guard" Replacement Sprocket Guard vs Odyssey BMX "Utility Pro PC Guard" Replacement Sprocket Guard
-
Federal Bikes "Impact Guard" Replacement Bolt Kit vs BSD "Barrier Guard" Replacement Sprocket Guard
-
Federal Bikes "Impact Guard" Replacement Bolt Kit vs Odyssey BMX "Utility Pro PC Guard" Replacement Sprocket Guard
-
The Shadow Conspiracy "Sabotage Guard" Replacement Sprocket Guard vs BSD "Barrier Guard" Replacement Sprocket Guard +1 more
-
Odyssey BMX "Halfbash PC" Replacement Sprocket Guard vs The Shadow Conspiracy "Sabotage Guard" Replacement Sprocket Guard +1 more
-
United Bikes "MDLCLS Guard" Replacement Sprocket Guard vs wethepeople "Paragon Guard" Replacement Sprocket Guard +1 more
Sprockets Spare Parts FAQ
What are Sprocket Spare Parts?
Besides bolts and adapters, Replacement Guards play a major role here. Modern street sprockets often have an aluminum core and a screw-on nylon/fiberglass guard ring. This ring is a sacrificial part: it is meant to wear out while grinding to protect the chain and sprocket.Replacement Guards: What to watch out for
If your guard is worn through, you can simply replace it. But be careful:- No Standard: There are no universal guards! An Odyssey guard does not fit an Eclat sprocket.
- Model Specifics: Even within a brand, there are differences. Pay attention to the exact product name of your sprocket.
- Mounting: The small retaining bolts are usually included with the replacement guard, but don't lose them during the swap.
Adapter Rings (Hat Washers)
Sprockets are often made with a large 24mm bore (or 23.8mm). If you ride a thinner spindle, you need an adapter ring to fill this gap.- 19mm Spindle: You need an adapter from 24mm to 19mm.
- 22mm Spindle: You need an adapter from 24mm to 22mm.
- 24mm Spindle: You usually need no adapter (with 24mm bore) or a very thin shim.
What do the specifications mean?
| Specification | Explanation | Examples / Available |
|---|---|---|
| Type | Type of spare part. | Guard (Plastic cover), Adapter, Bolt Set |
| Compatibility | Crucial for guards. | "Only for specific model", "Brand specific" |
| Dimensions (Adapter) | Diameter reduction. | 24mm to 19mm, 24mm to 22mm |