Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim - 36H / 20 Inch
-
Weight : 0.33kg / 0.73lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 31110
The Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim - 36H / 20 Inch is a carbon rim developed exclusively for BMX racing, built from high-quality Toray T700 carbon and featuring a low-profile design with 30mm height and 30mm width to minimize wind resistance while optimizing vertical and lateral stiffness. With 36 spoke holes, tubeless compatibility, and a recommended spoke tension of 110 kgf, it is engineered for the demands of competitive racing – disc brake use only. If you're looking for a lightweight, aerodynamic, and performance-oriented rim for your race setup, the Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim - 36H / 20 Inch at 330g is a compelling choice.
Facts: Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim - 36H / 20 Inch
- Wheel Size: #41#
- Material: Toray T700 Carbon
- Connection: Welded, Pinned
- Hole Count: 36H
- Width: #113#
- Height (Sidewall): 30mm
- ETRTO ⌀: #111#
- ERD: 375mm
- Rim Flanks: Aerowall (not compatible with rim brakes)
- Valve Hole Diameter: Presta
- Spoke Pattern: 3-Cross (no radial lacing)
- Extras: Tubeless compatible, Recommended spoke tension: 110 kgf, Compatible tire section: 20x1.40" – 20x1.90", Finish: UD Gloss / Water Decal under Clear Coat
