Enduro Bearings "BRT-060-Z" Bearing Press Set with Zip-Nut
-
Weight : 0.8kg / 1.76lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 42742
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BRT-060-Z" Bearing Press Set with Zip-Nut is the complete Enduro linear bearing press for hub and suspension bearings: two press rods, one for hubs and one for shock and suspension pivot bearings, the Zip-Nut quick release nut, a pair of Linear Quick handles and a set of guides and receiver cups for the most common hub and suspension bearings. The 29 degree ACME thread of the rods is wider and more accurate than a standard V thread and presses the bearing straight into its seat, the static nut runs on a needle bearing for smooth, bind free operation. The handles combine short/short for tight spaces, long/long for more leverage or short/long.
Facts: Enduro Bearings "BRT-060-Z" Bearing Press Set with Zip-Nut
- Contains:
- 2 press rods (hub and suspension length) with nuts, Zip-Nut quick release nut
- pair of Linear Quick handles
- hub guides 6800, 6802, 6803, 6900, 6901, 6902, 6903, MR 1526, MR 1830
- double sided inner guides (pushers) for suspension bearings 8/10/11 mm, 15/17 mm, 18/20 mm
- four double sided receiver cups for bearing outer diameters from 12 to 32 mm - Material: rods with 29 degree ACME thread, static nut with precision needle bearing, handles 6061 aluminium, nuts stainless steel
- Compatibility: hub and suspension bearings of the listed guide sizes, bearing outer diameter 12 to 32 mm; with the Enduro BRT-040 kits (24/29/30 mm) also for bottom bracket bearings, per manufacturer for BRT-060
- Extras:
- handles fit the 15 mm (5/8 inch) nuts, can also be driven with an open end wrench, socket or hex key
- Enduro part number: BRT-060-Z
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
