Wolf Tooth "EnCase System Bar Kit One" Multi Tool
-
Weight : 0.13kg / 0.29lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 39438
- Product safety
The Wolf Tooth "EnCase System Bar Kit One" Multi Tool stores two tools inside the handlebar: the Hex Bit Wrench with 14 functions (hex 2 to 8 mm, Torx T10, T25, T30, Phillips and flat head, spoke and valve core wrench) with a swivel head whose handle doubles as a breaker bar for more torque, and the Chain + Tire Plug Tool with a chain breaker for every chain up to 12 speed and an inserter for tubeless repair strips, five strips included. Both sit in sleeves of vibration-damping rubber with machined aluminium end caps that slide into the bar without rattling; the rubber flap can be trimmed for narrower bars, 17.5 mm minimum inner diameter. The sleeve has bonus space for a valve adapter or a master link. 132 g for the whole set. Not for every bar: Syntace Vector, Deity Skywire and Speedway, Chromag BZA and Cutlass, ENVE, Syncros Carbon, Ibis Carbon and e*thirteen Base do not fit.
Facts: Wolf Tooth "EnCase System Bar Kit One" Multi Tool
- Material: Hex Bit Wrench 7075-T6 aluminium and CrV steel; Chain + Tire Plug Tool 7075-T6 aluminium, CrMo steel, butyl strips; sleeves EPDM rubber and 6061-T6 aluminium
- Functions:
- hex 2, 2.5, 3, 4, 5, 6, 8 mm
- Torx T10, T25, T30
- Phillips #2, flat head 3.5 mm
- spoke wrench 3.23 mm (0.127"), valve core wrench
- chain breaker for every chain up to 12 speed (pin removal only)
- tubeless plug inserter with 5 repair strips - Length: Hex Bit Wrench 98 mm, Chain + Tire Plug Tool 102 mm
- Width: 15 mm diameter per tool
- Contains: 1 Hex Bit Wrench multi tool, 1 Chain + Tire Plug multi tool, 2 handlebar sleeves, 5 repair strips
- Extras:
- fits most MTB and road bars with at least 17.5 mm inner diameter, carbon and aluminium
- max torque 40 Nm (8 mm), 20 Nm (4, 5, 6 mm, T25, T30), 10 Nm (other bits)
- magnets and O-rings keep the bits in place, magnet on the tool bottom
- weight 132 g (manufacturer: Hex Bit Wrench 50 g, Chain + Tire Plug 46 g, sleeves 36 g)
