Wolf Tooth "Pack" Hanger Alignment Tool - Thru Axle and Quick Release
-
Weight : 0.32kg / 0.71lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 39435
- Product safety
The Wolf Tooth "Pack" Hanger Alignment Tool - Thru Axle and Quick Release straightens a bent derailleur hanger in the workshop or on the trail: axle out, derailleur off, the dummy axle with the matching thread into the dropout, the handle into the hanger, extend the indicator rod, then bend the handle until it sits parallel to the rod from every angle. The wheel stays out and spokes do not matter, because the axle itself is the reference. The tightening knob uses a rock-to-lock thread, and all parts nest inside the handle for transport. This version brings the axles for 12 mm thru axle frames (142 to 197 mm) and 5 mm quick release. For frames with an M10x1 hanger and the axle thread in the right dropout. 7075-T6 and 6061-T6 aluminium, 303 stainless steel, 324 g, made in the USA.
Facts: Wolf Tooth "Pack" Hanger Alignment Tool - Thru Axle and Quick Release
- Contains: 1 alignment tool with handle, indicator rod, dummy axles and thread inserts for 12 mm thru axle and 5 mm quick release
- Material: 7075-T6 and 6061-T6 aluminium, 303 stainless steel
- Compatibility: derailleur hangers with M10x1 thread; 12 mm thru axle 142 to 197 mm and 5 mm quick release in all widths; only frames with the axle thread in the right dropout
- Extras:
- aligns without the wheel, the axle is the reference
- rock-to-lock tightening knob
- all parts store inside the handle
- follow the instructions carefully to avoid damage to frame or tool
- weight 324 g (manufacturer)
- made in the USA
