Fit Bike Co. "Begin / OSS 2" 2016 BMX Bike
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 11.7kg / 25.79lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 9384
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Fit Bike Co. "Begin / OSS 2" 2016 BMX Bike
is a good quality and with a LHD drive unit modern equipped mid class BMX allround complete bike with a 20.75" inch top tube and a short 13.1" inch rear end. This bike is great for advanced riders with a body hight of approx. 1,65m - 1.75m. Here you already get a frame with 4130 CrMo main tubes that offers more stability. It also has an integrated headset (sealed bearing), integrated seat clamp, removable U-brake sockets and cable guides and a Mid BB (sealed bearing) which is today's standard on modern BMX frames and which makes installation, adjustment and maintance easy. The 1-pc. steerer and tapered legs of the fork also offers 4130 quality to keep the loads of street and ramp riding. The
Fit Bike Co. "Begin / OSS 2" 2016 BMX Bike
provides good quality and modern equipment like a 3-pc. CrMo LHD crankset with Odyssey "Twisted" plastic pedals, a toploader stem, a fully sealed front and LHD cassette hub with 14mm CrMo axle but also 2.3" wide tires and a pre-installed rear u-brake which ensures 100% BMX fun and feeling. The 4-pc. handle bar offers an extravagant street look and four included pegs and the non drive side hubguard on the cassette hub directly invites you to the first street session.
Facts: Fit Bike Co. "Begin / OSS 2" 2016 BMX Bike
- BMX Frame:
- 4130 CrMo main tubes (top-, down- and seat tube), down tube gusset, 1020 HiTen chainstays, integrated headset and seat clamp, removable U-brake sockets, Mid BB
- Top Tube (TT): 20.75"
- Chain Stay (CS): 13.1"
- Head Tube (HA): 75°
- Seat Tube (SA): 71°
- Standover: 8.6"
- BB Height: 11.6" - BMX Fork: 1-pc. 4130 CrMo 1-1/8" steerer, tapered 4130 CrMo legs
- BMX Bar:
- 1020 HiTen, 4-pc. street bar
- Height: 8.85"
- Width: 28.5"
- Backsweep: 12°
- Upsweep: 1° - Grips: Fit "Savage"
- Stem: Fit, Toploader, aluminium, 50mm
- Headset: Integrated, sealed bearing
- Gyro: -
- Brake Lever: Aluminium, 2-finger
- Brake Cable: Slic
- Brake: Aluminium, 990 U-Brake, soft compound brake pads
- Seat: Fit "Barstool", Pivotal, mid padded
- Seat Post: Fit, Pivotal, aluminium, 200mm
- Seat Clamp: Integrated
- Pedals: Odyssey "Twisted", plastic
- Chain: KMC "Z410H"
- Sprocket: Fit "Key", aluminium, 25T
- Crank: Fit, 3-pc. CrMo, LHD, 8 Spline, 175mm
- Bottom Bracket: Mid BB, sealed bearing
- Hub (front): Aluminium, 10mm CrMo male axle, sealed bearing, 36H
- Hub (rear): Cassette hub, aluminium, LHD, sealed bearing, 14mm male axle, non drive side hubguard, 36H, 9T, CrMo, sealed bearing
- Rim (front): 20" inch, Revenge "SW1", single wall, 36H
- Rim (rear): 20" inch, Revenge "OHM", double wall, 36H
- Spokes: Stainless steel 14G, brass nipples
- Tire (front): Fit "T/A", 65 PSI / 5 Bar, 20" x 2.3"
- Tire (rear): Fit "T/A", 65 PSI / 5 Bar, 20" x 2.3"
- Pegs: 4 x steel pegs, 100mm long
