wethepeople "CRS 18" BMX Bike - 18 Inch - Matt Black
-
Weight : 10.84kg / 23.9lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40436
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
wethepeople "CRS 18" BMX Bike - 18 Inch - Matt Black
is the 18 inch BMX bike for young riders who are not yet ready for a 20" bike. With its very short 11.65" chain stay and a 1020 HiTen frame with 4130 CrMo down tube it helps with learning new tricks. Integrated headset, Spanish BB and both hubs run on sealed bearings, plus a 3-piece CrMo crank with 152mm and holes for removable gyro tabs.
Facts: wethepeople "CRS 18" BMX Bike - 18 Inch - Matt Black
- Wheel Size: 18"
- BMX Frame: wethepeople "CRS 18", 1020 HiTen with 4130 CrMo downtube, integrated headset, Spanish BB, holes for removable gyro tabs
- Frame-Geometry:
- Top Tube (TT): 18"
- Chain Stay (CS): 11.65"
- Head Tube (HA): 75°
- Seat Tube (SA): 71.5°
- BB-Height (BB): 10.75"
- Standover (SO): 7.5" - BMX Fork: Salt "AM 18", 1020 HiTen, 4130 CrMo steerer, 26mm offset
- BMX Bar:
- Salt "CRS 18", 1020 HiTen, 2-piece
- Height: 8"
- Width: 26.77"
- Backsweep: 10°
- Upsweep: 3° - Grips: Salt "EX", 138mm, flangeless
- Stem: Salt "AM", topload, 45mm reach
- Headset: Salt "Pro", integrated, sealed bearing
- Gyro: -
- Gyro compatible: Yes
- Brake Lever: Salt "AM", aluminum
- Brake (rear): Salt "AM" U-brake, aluminum, rear
- Seat: wethepeople "CRS 18", pivotal
- Seat Post: Salt "AM", pivotal
- Seat Clamp: eclat "Pure", 6061-T6 aluminum, forged
- Pedals: eclat "Surge", nylon/fiberglass
- Chain: Salt "AM", Z1 type
- Sprocket: Salt "Gateway", steel, 25T
- Crank: Salt "Rookie", 3-piece, tubular, CrMo, 152mm, 8 spline
- Bottom Bracket: Salt "Spanish", Spanish BB, 19mm, press fit, sealed bearing
- Hub (front): Salt "AM", fully sealed, 10mm (3/8") male axle, 36H
- Hub (rear): Salt "AM", cassette hub, fully sealed, 14mm axle, 36H, 9T driver (sealed bearing)
- Rim (front): Salt "Fraction", single wall, 36H
- Rim (rear): Salt "Fraction", single wall, 36H
- Tire (front): Salt "Tracer" BMX tire, 18" x 2.2"
- Tire (rear): Salt "Tracer" BMX tire, 18" x 2.2"
- Pegs: -
- Delivery: The BMX bike comes pre-assembled in a box. For final assembly, only the handlebar, front wheel, pedals, and saddle need to be installed. Tools are not included.
- Usage: BMX Freestyle, designed for tricks, jumps, and fun in the skatepark or on the pump track.
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
