Fit Bike Co. "Dugan 1" 2016 BMX Bike - Matte Red
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 11.79kg / 25.99lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 9379
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Fit Bike Co. "Dugan 1" 2016 BMX Bike - Matte Red
is a modern equipped mid class BMX allround complete bike with a LHD drive unit. With a 20.75" inch top tube and a short 13.1" inch rear end this bike is great for riders with a body hight of approx. 1,65m - 1.75m. Here you already get a frame with a 4130 CrMo top-, down and seat tubes that offers more stability. It also has a integrated headset (sealed bearing), integrated seat clamp and a Mid BB (sealed bearing) which is today's standard on modern BMX frames and which makes installation, adjustment and maintance easy. The
Fit Bike Co. "Dugan 1" 2016 BMX Bike - Matte Red
provides good quality and modern equipment like a 3-pc. CrMo LHD crankset with Odyssey "Twisted" plastic pedals, a toploader stem, a fully sealed front and LHD cassette hub with 14mm CrMo axle but also 2.4" wide tires and a pre-installed rear u-brake which ensures 100% BMX fun and feeling.
Facts: Fit Bike Co. "Dugan 1" 2016 BMX Bike - Matte Red
- BMX Frame:
- 4130 CrMo top-, down- and seat tube, down tube gusset, 1020 HiTen chainstays, integrated headset and seat clamp, welded U-brake sockets, Mid BB
- Top Tube (TT): 20.75"
- Chain Stay (CS): 13.1"
- Head Tube (HA): 75°
- Seat Tube (SA): 71°
- Standover: 8.6"
- BB Height: 11.6" - BMX Fork: 4130 CrMo 1-1/8" steerer, tappered 1020 HiTen legs
- BMX Bar:
- 1020 HiTen, 2 pc. street bar
- Height: 8.7"
- Width: 29"
- Backsweep: 12°
- Upsweep: 1° - Grips: Fit "Savage"
- Stem: Fit, Toploader, aluminium, 50mm
- Headset: Integrated, sealed bearing
- Gyro: -
- Brake Lever: Aluminium, 2-finger
- Brake Cable: Slic
- Brake: Aluminium, 990 U-Brake, soft compound brake pads
- Seat: Fit "Combo", mid padded
- Seat Post: Fit "Combo", aluminium, 200mm
- Seat Clamp: Integrated
- Pedals: Odyssey "Twisted", plastic
- Chain: KMC "Z410H"
- Sprocket: Fit "Key", CrMo, 25T
- Crank: Fit, 3-pc. CrMo, LHD, 8 Spline, 170mm
- Bottom Bracket: Mid BB, sealed bearing
- Hub (front): Aluminium, 10mm CrMo male axle, sealed bearing, 36H
- Hub (rear): Cassette hub, aluminium, LHD, sealed bearing, 14mm male axle, 36H, 9T, CrMo, sealed bearing
- Rim (front): 20" inch, Revenge "SW1", single wall, 36H
- Rim (rear): 20" inch, Revenge "SW1", single wall, 36H
- Spokes: Stainless steel 14G, brass nipples
- Tire (front): Fit "T/A", 65 PSI / 5 Bar, 20" x 2.4"
- Tire (rear): Fit "T/A", 65 PSI / 5 Bar, 20" x 2.4"
- Pegs: -
