Fit Bike Co. "Pledge" 2016 BMX Bike - Royal Blue
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 11.56kg / 25.49lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 9371
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Fit Bike Co. "Pledge" 2016 BMX Bike - Royal Blue
is a good quality and modern equipped upscale beginner class BMX complete bike with 20" inch (wheel) size. With a 20" inch top tube and a short 13.1" inch rear end this bike is great for young riders with a body hight of approx. 1,50m - 1,60m. Here you already get a 8.25" inch low frame with a 4130 CrMo top and down tubes that offers more stability and which has a integrated headset (sealed bearing) and a Mid BB (sealed bearing) which is today's standard on modern BMX frames and which makes installation, adjustment and maintance easy. The
Fit Bike Co. "Pledge" 2016 BMX Bike - Royal Blue
provides good quality and modern equipment like a 3-pc. CrMo crankset with 170mm crank arms, a frontloader stem, a fully sealed cassette hub with 14mm CrMo axle but also 2.3" wide tires and a pre-installed rear u-brake which ensures 100% BMX fun and feeling but also ideally supporting young riders perfectly on learning the first street and ramp tricks.
Facts: Fit Bike Co. "Pledge" 2016 BMX Bike - Royal Blue
- BMX Frame:
- 4130 CrMo top and down tube with gusset, 1020 HiTen chainstays, integrated headset, welded U-brake sockets, Mid BB
- Top Tube (TT): 20.0"
- Chain Stay (CS): 13.1"
- Head Tube (HA): 75.5°
- Seat Tube (SA): 69°
- Standover: 8.25"
- BB Height: 11.7" - BMX Fork: 4130 CrMo 1-1/8" steerer, 1020 HiTen legs
- BMX Bar:
- 1020 HiTen, 2 pc. street bar
- Height: 8.7"
- Width: 29"
- Backsweep: 12°
- Upsweep: 1° - Grips: Fit "Benni"
- Stem: Fit Frontloader, aluminium, 48mm
- Headset: Integrated, sealed bearing
- Gyro: -
- Brake Lever: Aluminium, 2-finger
- Brake Cable: Slic
- Brake: Aluminium, 990 U-Brake, soft compound brake pads
- Seat: Fit "Combo", slim padded
- Seat Post: Fit "Combo", aluminium
- Seat Clamp: 1-Bolt, aluminium
- Pedals: Platform, nylon
- Chain: KMC "Z410H"
- Sprocket: Fit "Key", CrMo, 25T
- Crank: Fit, 3-pc. CrMo, 8 Spline, 170mm
- Bottom Bracket: MID BB, sealed bearing
- Hub (front): Aluminium, 10mm CrMo male axle, loose ball, 36H
- Hub (rear): Cassette hub, aluminium, sealed bearing, 14mm male axle, 36H, 9T, CrMo, sealed bearing
- Rim (front): 20" inch, Revenge "SW1", single wall, 36H
- Rim (rear): 20" inch, Revenge "SW1", single wall, 36H
- Spokes: Stainless steel 14G, brass nipples
- Tire (front): Fit "T/A", 65 PSI / 5 Bar, 20" x 2.3"
- Tire (rear): Fit "T/A", 65 PSI / 5 Bar, 20" x 2.3"
- Pegs: -
