Flybikes "Magneto CrMo" Cassette Hub
-
Weight : 0.42kg / 0.93lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 19183
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Flybikes "Magneto CrMo" Cassette Hub
is equipped with a magnetic driver system. Instead of pawls and springs, two magnets are used to lock the ratchet ring into place. This causes less friction than with the conventional system. The magnetic field of the Neomidium magnets also lasts for a very long time. This gives you an unmistakably fast, reliable and very stable rear wheel hub.
The
Flybikes "Magneto CrMo" Cassette Hub
is made of 7075-T6 aluminum and has the same spoke hole design as the Classic front hub. The driver, the cones and the screws are made of Chromoly and also treated with anti-rust. To ensure the best quality, the hubs are manufactured in Europe.
Facts: Flybikes "Magneto CrMo" Cassette Hub
- Material Hub Shell: 6061-T6 aluminum
- Holes: 36H
- Axle: 14mm Female heattreated chromoly axle with 10mm (3/8") CrMo bolts (for 14mm dropouts)
- Cones: with thread
- Bolts: CrMo 10mm (metric threat, 26 tpi)
- Driver: LHD 9T or RHD 9T
- Teeth Size: 1/2" x 1/8"
- Drive Side: right (RHD)
- Bearing: Sealed Bearings (SB)
- Extra: LHD 9T or RHD 9T
