FOX "Transfer Performance Elite" Dropper Seatpost - 31.6mm
-
Weight : 0.6kg / 1.32lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40606
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The FOX "Transfer Performance Elite" Dropper Seatpost - 31.6mm is FOX's Transfer, fully redesigned for 2025, in the Performance Elite version with black upper tube, here with 180 mm of drop. The reworked hydraulics with a new sealing system and Ekonol bushings actuate more easily and last longer, FOX quotes 300 hours to a full service. Air pressure is topped up through a Schrader valve under the seat clamp, and the six supplied 5 mm spacers cut travel by up to 25 mm. The post is cable actuated with internal routing, the remote lever is not included.
Facts: FOX "Transfer Performance Elite" Dropper Seatpost - 31.6mm
- Seatsystem: Rail
- Diameter: 31.6mm
- Travel: 180mm, reducible by up to 25 mm in 5 mm steps
- Length: 476 mm overall, 260 mm of it lower tube below the seal head (FOX user spec 2025)
- Actuation: cable, internal routing, actuator at the bottom; remote lever sold separately
- Weight: from 475 g (manufacturer figure for Transfer Factory 30.9 mm / 120 mm), heavier with 180 mm travel
- Scope of Delivery:
- 1 dropper seatpost
- 6 travel adjust spacers, 5 mm each
- WITHOUT remote lever - Extras:
- model year 2025, fully redesigned hydraulics
- new sealing system with Ekonol bushings, full service interval 300 hours
- air pressure adjustable via Schrader valve under the seat clamp (275-325 psi), metal valve cap with O-ring
- 2-bolt low stack head, fits Ø 7 mm, 7 x 9 and 7 x 10 mm oval rails, not 8 mm rails
- saddle clamp bolts 5.1 Nm, seatpost binder max. 5.1 Nm
- minimum insertion 100 mm, follow the frame maker's minimum, use assembly paste on carbon frames
- Performance Elite with black upper tube
- FOX part number 925-01-338
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
