Haro Bikes "SD" 2016 BMX Bike - Gloss Olive
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 10.61kg / 23.39lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 9182
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
This
Haro Bikes "SD" 2016 BMX Bike - Gloss Olive
is the top model of the Haro 2016 BMX complete bike series and comes with a Dennis Enarson signature basic equipment in 100% best 4130 CrMo quality to you as the Haro "SDV2" frame with 21" inch top tube and 13.75" long rear end as centerpiece, a Haro "SD" fork and a 9" inch high Demolition "Rig"handlebar build up as a pro level BMX bike with the highest quality attachments from Haro and Demolition. As a top current street BMX bike this
Haro Bikes "SD" 2016 BMX Bike - Gloss Olive
of course is equipped with a high quality RHD drive unit consisting of a 2-pc. CrMo crank, a halflink chain and a freecoaster with a stable 14mm CrMo hollow axle. High quality branded parts like the CNC machined high
Haro "Lineage" toploader stem,
an equally CNC machined
Haro "Lineage" 28T sprocket,
Demolition "Dennis Enarson" signature grips,
Demolition "Trooper" plastic pedals,
stable
Haro "Sata" double wall rims
and the wide
Demolition "Rig" tires
make this
Haro Bikes "SD" 2016 BMX Bike - Gloss Olive
a top modern BMX complete bike which demands pro level requirements for a absolutely fair price-performance ratio.
Facts: Haro Bikes "SD" 2016 BMX Bike - Gloss Olive
- BMX Frame:
- 100% 4130 CrMo, butted top and down tubes with gusset, integrated head set, integrated seat clamp, removable U-brake sockets and cable mounts, Mid BB
- Top Tube (TT): 21.0"
- Chain Stay (CS): 13.75"
- Head Tube (HA): 75°
- Seattube (SA): 71°
- BB-High (BB): 11.5"
- Frame Hight: 9"
- Standover (SO: 21.5" - BMX Fork: Haro, 100% heat treated 4130 CrMo, 1-pc. CNC machined 1-1/8 Internal threaded steerer with integrated race cone, tappered fork legs with investment cast dropouts, CNC machined aluminium top bolt
- BMX Bar:
- Demolition "Rig", 2-pc., Dennis Enarson signature, 100% 4130 CrMo, heat treated, butted
- Height: 9"
- Width: 29"
- Backsweep: 12°
- Upsweep: 2° - Grips: Demolition "Dennis Enarson" signature, rubber, plastic barends
- Stem: Haro "Lineage", toploader, 6061 aluminium, CNC machined, 52mm reach
- Headset: Integrated, sealed bearing
- Gyro: -
- Brake Lever: Aluminium, 2-finger
- Brake: U-brake, aluminium, rear
- Seat: Demolition "Markit", Tripod, mid padded
- Seat Post: Haro, Tripod, aluminium
- Seat Clamp: Integrated
- Pedals: Demolition "Trooper", plastic
- Chain: KMC "half link"
- Sprocket: Haro "Lineage", aluminium, CNC machined, 28T
- Crank: CrMo, 2-pc., 48 spline, 22mm CrMo hollow spindel 175mm
- Bottom Bracket: Mid BB, sealed bearing
- Hub (front): Aluminium shell, 14mm female CrMo axle, 10mm (3/8") CrMo bolts, sealed bearing, 36H
- Hub (rear): Freecoaster hub, 14mm CrMo male hollow axle, sealed bearing, 36H, 9T, sealed bearing
- Rim (front): Aluminium, double wall, 36H
- Rim (rear): Aluminium, double wall, 36H
- Tire (front): Demolition "Rig", 20" x 2.4"
- Tire (rear): Demolition "Rig", 20" x 2.25"
- Pegs: -
