Pride Racing "Control V1" BMX Race Wheelset - 20 Inch
- Weight : 1.73kg / 3.81lbs
- Packaging Unit: 1 Set
- Product ID (PID): 28693
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Control V1" BMX Race Wheelset - 20 Inch is a BMX race wheel set for 20 inch wheels in the 451 format used in the Junior and Expert classes. The double wall Control Expert rims are made from 6061-T6 aluminum, measure 23mm wide and 20mm high, are built for disc brakes and laced with 28 stainless steel spokes. The CNC machined Control V1 hubs in 6061-T6 aluminum run on sealed bearings, take the rotor on a Centerlock mount and engage through 6 pawls and 180 points with almost no free play, which helps you out of the gate and out of every corner. Both hubs run 10mm axles and the freehub follows the Shimano standard. The rear wheel comes with a lock ring and spacers to set the chain line, rim tape is not included and the manufacturer lists the set at 1730g.
Facts: Pride Racing "Control V1" BMX Race Wheelset - 20 Inch
- Wheel Size: 20"
- Rim: Control Expert (16-451)
- Material: 6061-T6 Aluminum, Doublewall
- Brake Type: Disc
- Holes: 28H
- Width: 23mm
- Height: 20mm
- Valve: Presta
- Tyre width: 20-34mm (20x1-1/8" - 20x1-3/8")
- Eyelets for high spoke tension - ETRTO ⌀: 451mm (20")
- Hub: Control V1
- Material: 6061-T6 Aluminum
- Bearing: Sealed Bearings (SB), front Enduro 15267 (15x26x7mm), rear Enduro 6902 (15x28x7mm)
- Driver: Shimano standard (cassette freehub), 7075-T6 aluminum
- Engagement: 180 points / 6 pawls
- Disc mount: Centerlock
- Spacing: 100mm (front), 110mm (rear)
- CNC machined, high flanges - Axles: 10mm (front), 10mm (rear)
- Holes: 28H
- Spokes: Stainless steel
- Weight: 1730g (front wheel 778g, rear wheel 952g)
- Content: 1 wheel set (front wheel + rear wheel)
- Rear wheel comes with lock ring and spacers to adjust the chain line
- Rim tape not included
