SE Bikes "Beast Mode Ripper 27.5" 2020 BMX Cruiser Bike - 27.5 Inch
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 15.01kg / 33.09lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 19654
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SE Bikes "Beast Mode Ripper 27.5" 2020 BMX Cruiser Bike - 27.5 Inch
is a cooperation between SE Bikes and NFL Legend Marshawn Lynch.
The
SE Bikes "Beast Mode Ripper 27.5" 2020 BMX Cruiser Bike - 27.5 Inch
comes with 27.5" big tires and is made to "cruise".
With the included Wheelie-Pegs you have a lot of oppurtunities to perform tricks like a wheelie.
Facts: SE Bikes "Beast Mode Ripper 27.5" 2020 BMX Cruiser Bike - 27.5 Inch
- Wheel Size: 27.5 Inch
- BMX Frame:
- 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, 73mm Euro Bottom Bracket, 142mm Spaced Dropouts, Disc Brake Tabs
- Top Tube (TT): 22.9"
- Chain Stay (CS): 17.8"
- Head Tube (HA): 71°
- Seat Tube (SA): 73°
- BB Height: 16.1"
- Standover (SO): 30.5"
- Wheelbase (WB): 43.2" - BMX Fork: SE "Landing Gear", 1-1/8" steerer, 100% 4130 CrMo, 430mm height (axle to crown), 110mm spaced dropouts, 39mm offset
- BMX Bar:
- SE "Oakland 4pc", Cruiser, 100% 4130 CrMo, 4-pc.
- Height: 7"
- Width: 29"
- Backsweep: 12°
- Upsweep: 2° - Grips: Special Edition ODI Mushroom II Grips, Made in USA, w/ Money Lynch Donuts
- Stem: Beast Mode Retro Alloy Top-Load w/ Engraved Beast Mode Logo on Top & Sides, 55mm Reach
- Headset: FSA Orbit CE, Sealed 1-1/8" Integrated
- Gyro: -
- Brake Lever: Tektro MT2.1, 2-Finger, aluminum
- Brake Cable: slick
- Brake: Avid BB5, Mechanical Disc, Tri-Align Caliper Positioning System, 160mm Rotor, Front & Rear
- Seat: Beastmode Edition Diamond Stitch Flyer Seat w/ Custom SE Bottle Opener Brace
- Seat Post: Aluminum, retro, fluted micro adjust, 27.2mm
- Seat Clamp: Aluminum, 1-bolt
- Pedals: X-Pedo, aluminum, platform, removable pins
- Chain: KMC "S1"
- Sprocket: SE Racing, aluminum, 33T
- Crank: SE V-Ridge 3-pc. CrMo, 19mm CrMo spindle (160mm long)
- Bottom Bracket: External Euro BB, sealed bearing, 100mm wide
- Hub (front): SE, aluminum, loose ball, 10mm (3/8") CrMo axle, 110mm installation width, 36H
- Hub (rear): SE, cassette, aluminum, sealed bearing, 10mm (3/8") CrMo axle, 142mm installation width, 36H, 16T
- Rim (front): 42mm Double-Wall, 27.5", aluminum, 42mm wide, 36H
- Rim (rear): 42mm Double-Wall, 27.5", aluminum, 42mm wide, 36H
- Tire (front): Vee Tire Co x Beast Mode SE Racing Speedster, 27.5" x 3"
- Tire (rear): Vee Tire Co x SE Racing Speedster, 27.5" x 3"
- Extras: SE Racing Snap Padset, Alloy Valve Caps, Custom Marshawn Lynch Beast Mode 27.5 Sticker Sheet, SE Chain Tensioners, SE Wheelie Pegs
