SE Bikes "DBlocks Big Ripper 29" 2019 BMX Cruiser Bike - 29 Inch - Camouflage
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 13.24kg / 29.19lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 15146
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SE Bikes "DBlocks Big Ripper 29" 2019 BMX Cruiser Bike - 29 Inch - Camouflage
comes with a lightweight but sturdy aluminium frame and a wheelset in 29" inch size which is comparable to a dirt bike without front suspension and thus great for cruisin. The
SE Bikes "DBlocks Big Ripper 29" 2019 BMX Cruiser Bike - 29 Inch - Camouflage
brings you with its high quality selected parts still the charm of the 80's but of course first and foremost huge and comfortable riding fun and a very clean look.
Facts: SE Bikes "DBlocks Big Ripper 29" 2019 BMX Cruiser Bike - 29 Inch - Camouflage
- Wheel Size: 29"
- BMX Frame:
- Dblocks Wheelie King Model, 6061 aluminium, floval tubing, looptail rear end, retro dropouts, Euro BB, welded V-brake sockets
- Top Tube (TT): 23.6"
- Chain Stay (CS): 18"
- Head Tube (HA): 71°
- Seat Tube (SA): 71°
- BB Height: 12"
- Standover (SO): 30.5"
- Wheelbase (WB): 43.7" - BMX Fork: SE "Landing Gear", 100% 4130 CrMo, 1-1/8" steerer
- BMX Bar:
- SE "Power Wing", Cruiser, 100% 4130 CrMo, 2-piece.
- Height: 7"
- Width: 28"
- Backsweep: 10°
- Upsweep: 1° - Grips: Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, with "Keep that Wheel Up" Donuts
- Stem: SE "Retro", Aluminium, toploader with engraved Dogtown logo and cutouts
- Headset: Tange, 1-1/8", threadless, loose ball
- Gyro: -
- Brake Lever: Tektro "316A", aluminium, 2-finger
- Brake Cable: Slick
- Brake: Tektro "837-AL", V-Brake, aluminium
- Seat: SE "Raise It Up Flyer", CrMo rails, padded, with bottle opener brace
- Seat Post: micro adjust, aluminium, fluted 27.2mm
- Seat Clamp: Aluminium, 1-bolt, 31.8mm Inner Diameter
- Pedals: X-Pedo, platform, removable pins
- Chain: KMC "S1"
- Sprocket: SE "Racing", aluminium, 33T
- Crank: SE, 3-pc., CrMo, 8 spline, 175mm
- Bottom Bracket: Euro BB, Sealed Bearing
- Hub (front): High-Flange, aluminium, Sealed Bearing, 36H
- Hub (rear): High-Flange, aluminium, Sealed Bearing, 36H, ACS "Crossfire", 15T, freewheel
- Rim (front): Aluminium, double wall, 36H
- Rim (rear): Aluminium, double wall, 36H
- Tire (front): Freedom ThickSlick Comp, 29" x 2.1"
- Tire (rear): Freedom ThickSlick Comp, 29" x 2.1"
- Extras: Dblocks number plate and SE Wheelie pegs, Cycle Squad Maniaccs Padset, custom Dblocks sticker sheet and signed autograph card
