SE Bikes "Fat Quad 26" 2021 BMX Cruiser Bike - 26 Inch
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 16.23kg / 35.78lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 19512
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
It was only a matter of time until SE Bikes creates the fattest Quad of them all, the
SE Bikes "Fat Quad 26" 2021 BMX Cruiser Bike - 26 Inch
! This
SE Bikes "Fat Quad 26" 2021 BMX Cruiser Bike - 26 Inch
is centered around the unique Quadangle frame design featuring an oversized downtube, integrated head tube and a legendary looptail rear end. New this year is an upgrade to Tektro Auriga hydraulic disc brakes. One you go fat, you never go back...
Facts: SE Bikes "Fat Quad 26" 2021 BMX Cruiser Bike - 26 Inch
- Wheel Size: 26"
- BMX Frame:
- 6061 Aluminum, Single Downtube Fat Quad Design, Internally-machined Integrated Head Tube, Looptail Rear End, Retro Dropouts, 100mm Euro Bottom Bracket, 170mm Spaced Dropouts, Disc Brake Tabs
- Top Tube (TT): 22.1"
- Chain Stay (CS): 17.8"
- Head Tube (HA): 70°
- Seat Tube (SA): 72°
- BB Height: 14.9"
- Wheelbase (WB): 42.6"
- Standover (SO): 30" - BMX Fork: Landing Gear, Full Cr-Mo, Disc Tabs, 450mm Axle to Crown, 38mm Offset, 135mm Spaced Dropouts
- BMX Bar:
- Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12°
Backsweep, 2° Upsweep
- Height: 7"
- Width: 29"
- Backsweep: 12°
- Upsweep: 2° - Grips: Special Edition ODI Mushroom II Grips, Made in USA, w/ SE Donuts
- Stem: SE "Retro", aluminum, topload, engraved SE logo, lightweight cut outs, 55mm reach
- Headset: FSA Orbit CE, Sealed 1-1/8" Integrated
- Gyro: -
- Brake Lever: Tektro "316A", aluminum, 2-finger, front and rear
- Brake Cable: Slic
- Brake: Tektro Auriga, Hydraulic Disc, Easy to Adjust Open System, Dual Piston, Automatic Caliper Positioning, 180mm Front Rotor, 160mm Rear Rotor
- Seat: SE "SE Flyer", CrMo rails, padded, with Custom SE Bottle Opener Brace
- Seat Post: SE "Retro", micro adjust, fluted, aluminium, 27.2mm
- Seat Clamp: One Bolt, aluminum
- Pedals: X-Pedo Low-profile Platform, aluminum, removable pins
- Chain: KMC "S1"
- Sprocket: 27T Alloy SE Racing Sprocket
- Crank: SE V-Ridge 3-pc Cr-Mo Cranks,175mm, External Sealed Bearing Euro Bottom Bracket, 200mm Spindle length, 19mm Spindle Diameter
- Bottom Bracket: External Sealed Bearing Euro Bottom Bracket
- Hub (front): SE "Bubble Mohawk", aluminum, high flange, sealed bearing, 10mm (3/8) CrMo acle, 36H
- Hub (rear): SE "Bubble Mohawk", aluminum, high flange, sealed bearing, 10mm (3/8) CrMo acle, 36H, 17T, freewheel
- Rim (front): SE, aluminum, double wall, 65mm, 36H
- Rim (rear): SE, aluminum, double wall, 65mm, 36H
- Tire (front): Vee Tire Co x SE Racing "Chicane"
- Width: 26" x 3.5"
- Tire (rear): Vee Tire Co x SE Racing "Chicane"
- Width: 26" x 3.5"
- Pegs: -
- Extras: Alloy Valve Caps, SE Chain Tensioners
