SE Bikes "Monster Ripper 29" 2020 BMX Cruiser Bike - 29 Inch
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 15.38kg / 33.91lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 23310
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SE Bikes "Monster Ripper 29" 2020 BMX Cruiser Bike - 29 Inch
comes with 29" big tires and is made to "cruise".
Facts: SE Bikes "Monster Ripper 29" 2020 BMX Cruiser Bike - 29 Inch
- Wheel Size: 29 Inch
- BMX Frame:
- 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, 73mm Euro Bottom Bracket, 142mm Spaced Dropouts, Disc Brake Tabs
- Top Tube (TT): 23.5"
- Chain Stay (CS): 18.5"
- Head Tube (HA): 71°
- Seat Tube (SA): 71°
- BB Height: 12.8"
- Standover (SO): 31"
- Wheelbase (WB): 44.1" - BMX Fork: SE "Landing Gear", 1-1/8" steerer, 100% 4130 CrMo, 430mm height (axle to crown), 110mm spaced dropouts, 39mm offset
- BMX Bar:
- SE "Big Honkin'", Cruiser, 100% 4130 CrMo, 2-pc.
- Height: 7"
- Width: 29"
- Backsweep: 12°
- Upsweep: 2° - Grips: Special Edition ODI Mushroom II Grips, Made in USA, w/ DUB Edition Donuts
- Stem: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- Headset: FSA Orbit CE, Sealed 1-1/8" Integrated
- Gyro: -
- Brake Lever: Tektro MT2.1, 2-Finger, aluminum
- Brake Cable: slick
- Brake: Avid BB5, Mechanical Disc, Tri-Align Caliper Positioning System, 160mm Rotor, Front & Rear
- Seat: DUB Edition Flyer Seat w/ Custom SE Bottle Opener Brace
- Seat Post: Aluminum, retro, fluted micro adjust, 27.2mm
- Seat Clamp: Aluminum, 1-bolt
- Pedals: X-Pedo, aluminum, platform, removable pins
- Chain: KMC "S1"
- Sprocket: SE Racing, aluminum, 33T
- Crank: SE V-Ridge 3-pc. CrMo, 19mm CrMo spindle (160mm long)
- Bottom Bracket: External Euro BB, sealed bearing, 100mm wide
- Hub (front): SE, aluminum, loose ball, 10mm (3/8") CrMo axle, 110mm installation width, 36H
- Hub (rear): SE, cassette, aluminum, sealed bearing, 10mm (3/8") CrMo axle, 142mm installation width, 36H, 20T
- Rim (front): 42mm Double-Wall, 29", aluminum, 42mm wide, 36H
- Rim (rear): 42mm Double-Wall, 29", aluminum, 42mm wide, 36H
- Tire (front): Vee Tire Co x DUB Edition SE Racing Speedster, 29" x 2.8"
- Tire (rear): Vee Tire Co x DUB EditionSE Racing Speedster, 29" x 2.8"
- Extras: DUB Edition Padset, Custom DUB Edition Sticker Sheet, Alloy Valve Caps, SE Chain Tensioners
