SE Bikes "Perry Kramer PK Ripper 27.5+" 2021 BMX Cruiser Bike - 27.5 Inch
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 15.01kg / 33.09lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 19509
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SE Bikes "Perry Kramer PK Ripper 27.5+" 2021 BMX Cruiser Bike - 27.5 Inch
is a cooperation between SE Bikes and BMX Legend Perry Kramer.
The
SE Bikes "Perry Kramer PK Ripper 27.5+" 2021 BMX Cruiser Bike - 27.5 Inch
features tubeless ready 27.5” x 2.5” Vee Speedster tires, sealed internal headset, internal cable routing, SRAM Level hydraulic disk brakes, Oakley B-1B grips, and of course Perry’s stamp of approval. This is the PK of the future!
Facts: SE Bikes "Perry Kramer PK Ripper 27.5+" 2021 BMX Cruiser Bike - 27.5 Inch
- Wheel Size: 27.5 Inch
- BMX Frame:
- 22.8"
- Top Tube (TT): 22.8"
- Chain Stay (CS): 17.4"
- Head Tube (HA): 71°
- Seat Tube (SA): 73°
- BB Height: 15.7"
- Standover (SO): 29.5"
- Wheelbase (WB): 42.7" - BMX Fork: SE "Landing Gear", 1-1/8" steerer, 100% 4130 CrMo, 430mm height (axle to crown), 110mm spaced dropouts, 39mm offset
- BMX Bar:
- SE "Oakland", Cruiser, 100% 4130 CrMo, 4-pc.
- Height: 7"
- Width: 29"
- Backsweep: 12°
- Upsweep: 2° - Grips: Oakley B-1B, Made in USA, w/ Perry Kramer Donuts
- Stem: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- Headset: FSA Orbit CE, Sealed 1-1/8" Integrated
- Gyro: -
- Brake Lever: SRAM Direct Link Level, aluminum
- Brake Cable: Hydraulic
- Brake: AHydraulic Disc, 2-Piston Caliper, 160mm Rotor, Expandable Bladder, Timing Port Closure, DOT 5.1 Fluid
- Seat: Perry Kramer SE Flyer Seat w/ Custom SE Bottle Opener Brace
- Seat Post: Aluminum, retro, fluted micro adjust, 27.2mm
- Seat Clamp: Aluminum, 1-bolt
- Pedals: X-Pedo, aluminum, platform, removable pins
- Chain: KMC "S1"
- Sprocket: SE Racing, aluminum, 33T
- Crank: SE 3-pc. CrMo, 48 spline, 19mm CrMo spindle (200mm long), 175mm
- Bottom Bracket: Euro BB, sealed bearing, 100mm wide
- Hub (front): SE, aluminum, loose ball, 10mm (3/8") CrMo axle, 110mm installation width, 36H
- Hub (rear): SE, cassette, aluminum, sealed bearing, 10mm (3/8") CrMo axle, 142mm installation width, 36H, 17T
- Rim (front): Alex DP30 Tubeless Compatible, 42mm Double-Wall, 27.5", aluminum, 42mm wide, 36H
- Rim (rear): Alex DP30 Tubeless Compatible, 42mm Double-Wall, 27.5", aluminum, 42mm wide, 36H
- Tire (front): Vee Tire Co x SE Racing Speedster, Tubeless Ready, 27.5" x 2.5"
- Tire (rear): Vee Tire Co x SE Racing Speedster, Tubeless Ready, 27.5" x 2.5"
- Extras: SE Racing Snap Padset, Alloy Valve Caps, Custom Perry Kramer PK Ripper 27.5 Sticker Sheet, SE Chain Tensioners, Tubeless Valves, Tubeless Rim Tape
