SE Bikes "STR-24 Quadangle" 2019 BMX Cruiser Bike - 24 Inch
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 13.38kg / 29.5lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 15180
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SE Bikes "STR-24 Quadangle" 2019 BMX Cruiser Bike - 24 Inch
is a retro look designed cruiser BMX bike and based on a Stu Thomsen Replica frame, fork and handlebar made of 100% 4130 CrMo . This Cruiser is build up on SE Bikes in 1977 first produced BMX frame which has been used in the BMX race sport. This frame has set new standards in the context of structural engineering. This
SE Bikes "STR-24 Quadangle" 2019 BMX Cruiser Bike - 24 Inch
comes in a very limited edition in real classic colouration and provides you with a piece of tangible BMX history but of course is still huge fun to ride nowadays.
Facts: SE Bikes "STR-24 Quadangle" 2019 BMX Cruiser Bike - 24 Inch
- Wheel Size: 24"
- BMX Frame:
- Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
- Top Tube (TT): 22"
- Chain Stay (CS): 15.3"
- Head Tube (HA): 73.5°
- Seat Tube (SA): 72°
- BB Height: 12"
- Wheelbase (WB): 39.1"
- Standover (SO): 24.5" - BMX Fork: SE "Cowboy Cut Landing Gear", 100% 4130 CrMo
- BMX Bar:
- SE "Big Honkin" Cruiser, 100% 4130 CrMo, 2-piece.
- Height: 6"
- Width: 29"
- Backsweep: 10°
- Upsweep: 1° - Grips: ODI "Mushroom II Stu Thomsen Signature Dual-Ply", special edition, with donuts, made in USA
- Stem: SE "Retro", aluminum, topload, engraved SE logo, lightweight cut outs, 55mm Reach
- Headset: Tange, A-head set, 1-1/8", threadless, loose ball
- Gyro: -
- Brake Lever: Tektro "316A", aluminum, 2-finger, front and rear
- Brake Cable: Slic
- Brake: Tektro "837-AL", V-Brake, aluminum, front and rear
- Seat: SE "Stu Thomsen SE Flyer", CrMo rails, padded, with Custom SE Bottle Opener Brace
- Seat Post: SE "Retro", micro adjust, fluted, aluminium, 27.2mm
- Seat Clamp: One Bolt, aluminum
- Pedals: SE Racing "Bear Traps"
- Chain: KMC "Z6"
- Sprocket: Redline "Flight", 39T
- Crank: Redline "Flight" Cranks, Dual Pinch Bolt, 8 spline, 19mm CrMo spindle, 180mm
- Bottom Bracket: American BB, sealed bearing
- Hub (front): SE "Mohawk", aluminum, high flange, sealed bearing, 10mm (3/8) CrMo acle, 36H
- Hub (rear): SE "Mohawk", aluminum, high flange, sealed bearing, 10mm (3/8) CrMo acle, 36H, 17T, freewheel
- Rim (front): SE, aluminum, double wall, chrome, 36T
- Rim (rear): SE, aluminum, double wall, chrome, 36T
- Tire (front): Vee Tire Co "MK3"
- Width: 24" x 1.85"
- Tire (rear): Vee Tire Co "MK3"
- Width: 24" x 1.85"
- Pegs: -
- Extras: SE Racing Rad Plate, Chrome STR Quad Padset, Alloy Valve Caps, Cutom Stu Thomsen STR-24 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsenvalve caps,
