Spank "HEX Straightpull Boost" MTB Rear Hub
- Weight : 0.31kg / 0.68lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 33198
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Spank "HEX Straightpull Boost" MTB Rear Hub is the straight-pull version of the HEX Drive rear hub. Straight spokes sit in the flange without a bend, which takes the usual break point at the spoke head out of the wheel. The freehub is the same as on the J-Type: six pawls in three stages, 102 points of engagement, a 3.5 degree engagement angle. Built for 12 x 148 mm Boost with 28 holes, pick the freehub body above. Aluminium shell, sealed cartridge bearings.
Facts: Spank "HEX Straightpull Boost" MTB Rear Hub
- Material: Aluminum
- Holes: 28H
- Version: 12 x 148 mm Boost / 6-bolt / Shimano HG or 12 x 148 mm Boost / 6-bolt / Shimano Micro Spline
- Disc Mount: 6-bolt
- Points of Engagement: 102 P.O.E, 3.5 degree engagement angle
- Bearings: sealed (SB)
- Scope of Delivery: 1 piece
- Extras:
- 6 independent pawls in 3 stages
- flanges for straight-pull spokes
- freehub body and end caps available separately
- no axle adapter included
