Stereo Bikes "Flash" 2017 BMX Bike - LHD - Freecoaster - Midnight Black Raw
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 11.2kg / 24.69lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 10671
Found an error? Report it. 5 EUR voucher if confirmed.
The
Stereo Bikes "Flash" 2017 BMX Bike - LHD - Freecoaster - Midnight Black Raw
is a High End BMX complete bike and offers 100% 4130 Sanko CrMo material quality on frame, fork and handlebar as well as the best aftermarket parts Stereo Bikes has to offer.
The high stem-handlebar setup consists of a CNC machined
Stereo "Charger" topload stem with 52mm reach
and a
Stereo "Hard 4pc" bar
with 9.5" height and 30" width.
The LHD drive unit consists of a 2.5-pc.
Stereo "Psychedelic V2" crank with 22mm hollow spindle,
a CNC machined
Stereo "Guardian" sprocket with chainguard made from 7075 aluminum,
a
Stereo "Chain Gang" half link chain
and a stable
Stereo "Rollacoaster" freecoaster hub with 14mm CrMo hollow male axle and LHD 9T driver.
Both
Stereo "Flathead" double wall rims are equipped with 2.4" wide
Stereo "Pickup" tires
and the removable brake hardware gives you the choice on this beautiful
Stereo Bikes "Flash" 2017 BMX Bike - LHD - Freecoaster - Midnight Black Raw
to ride with rear U-Brake or even visually clean without any brake hardware.
Facts: Stereo Bikes "Flash" 2017 BMX Bike - LHD - Freecoaster - Midnight Black Raw
- BMX Frame:
- Stereo Bikes "Flash", 100% 4130 Sanko CrMo, top tube and down tube with gusset, integrated head set, integrated seat clamp, removable U-brake mounts, Mid BB
- Top Tube (TT): 21.0"
- Chain Stay (CS): 13.5"
- Head Tube (HA): 75°
- Seat Tube (SA): 71°
- BB Height: 11.8"
- Standover (SO): 9.25" - BMX Fork: Stereo "Mono Plus", 100% 4130 Sanko CrMo, 1-pc. steerer, tappered legs
- BMX Bar:
- Stereo "Hard 4pc" bar, 100% 4130 Sanko CrMo, 4-pc.
- Height: 9.5"
- Width: 30"
- Backsweep: 12°
- Upsweep: 3° - Grips: Stereo "Thinners", rubber, PVC bar ends
- Stem: Stereo "Charger Plus", topload, 6061-T6 aluminum, CNC machined, 52mm reach
- Headset: Integrated, sealed bearing
- Gyro: -
- Brake Lever: Tektro "XL 510", aluminum, 2-finger, hinged
- Brake Cable: Slic
- Brake: Tektro "907", U-brake, aluminum
- Seat: Stereo "Gator" Pivotal, mid padded
- Seat Post: Stereo "Antenna" Pivotal, 6061-T6 aluminum, 200mm
- Seat Clamp: Integrated
- Pedals: Fly Bikes "Ruben", PVC
- Chain: Stereo "Chaingang", halflink
- Sprocket: Stereo "Guardian", 7075 aluminium, CNC machined, inkluding chainguard, 28T
- Crank: Stereo "Psychedelic V2", LHD/RHD, 2.5-pc., 100% 4130 CrMo, heat treated, 48 spline, hollow spindle, 170mm
- Bottom Bracket: Mid BB, sealed bearing
- Hub (front): Stereo "Centauri", aluminium, female, Stereo "Volcano" washers, 10mm CrMo bolts with 8mm allen head, sealed bearing, 36H
- Hub (rear): Stereo "Rollacoaster", Freecoaster, LHD, 14mm CrMo hollow axle, sealed bearing, 36H, incl. Hubguard, 9T LHD
- Rim (front): Stereo "Flathead", double wall, with Stereo "Flat Tire Suck" nylon rim strip, 36H
- Rim (rear): Stereo "Flathead", double wall, with Stereo "Flat Tire Suck" nylon rim strip, 36H
- Tire (front): Stereo "Pickup" HP, 110 PSI, 20" x 2.4"
- Tire (rear): Stereo "Pickup" HP, 110 PSI, 20" x 2.4"
- Pegs: 2 x Stereo "Slim" steel pegs
- Extras: Braided "Hippy" brake cable band, LHD drive with freecoaster hub
