Wolf Tooth "ShiftMount" MTB Shifter Mount Adapter
-
Weight : 0.01kg / 0.02lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 39644
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Wolf Tooth "ShiftMount" MTB Shifter Mount Adapter mounts a shifter to the brake clamp of another manufacturer, so brake and shifter share one clamp and the bar stays tidy. The version is named by shifter and brake: MatchMaker to I-Spec EV puts a SRAM MatchMaker shifter on a Shimano I-Spec EV brake (XTR M9100/M9120, XT M8100, SLX M7100), MatchMaker to I-Spec II on a Shimano I-Spec II brake (XTR M9000, XT M8000, SLX M7000, Deore M6000), MatchMaker to Magura on a current Magura brake, and I-Spec EV to I-Spec II brings a current Shimano shifter to an older I-Spec II brake. 6061-T6 aluminium, for the right side; the brake and shifter manufacturers say which mount you have.
Facts: Wolf Tooth "ShiftMount" MTB Shifter Mount Adapter
- Fits: shifter and brake per version (shifter type to brake type): SRAM MatchMaker shifter to Shimano I-Spec EV (XTR M9100/M9120, XT M8100/M8120, SLX M7100; Deore M6100/M4100 not optimal), to Shimano I-Spec II (XTR M9000/M9020, XT M8000/M8020, SLX M7000, Deore M6000) or to Magura (all current models); Shimano I-Spec EV shifter to Shimano I-Spec II brake
- Material: Aluminum 6061-T6
- Contains: 1 adapter with bolt
- Mounting: on the brake clamp, for the right side (rear derailleur)
- Extras:
- weight with bolt: MatchMaker/I-Spec EV 9 g, MatchMaker/I-Spec II 10.5 g, MatchMaker/Magura 12 g, I-Spec EV/I-Spec II 6 g (manufacturer)
- MatchMaker to Magura: the gap at the top of the clamp is intended
- MatchMaker versions not recommended for SRAM AXS pods
- I-Spec EV to I-Spec II not for the SW-M8250 and SW-M9250 Di2 switches
- Shimano I-Spec A, Hope and TRP brakes are not supported
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
