Birzman "Torque Driver" Torque Wrench
-
Weight : 0.07kg / 0.15lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 35983
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Birzman "Torque Driver" Torque Wrench is a torque wrench with one fixed value that slips when reached: 4 Nm for stem, seatpost and bar clamps on light parts, 5 Nm for most clamps on aluminium. Four S2 tool steel bits are included (3, 4 and 5 mm hex, T25), the handle fits a jersey pocket.
Facts: Birzman "Torque Driver" Torque Wrench
- Contains: 1x torque driver, 4x bit (hex 3, 4 and 5 mm, Torx T25)
- Material: high polymer (handle), S2 tool steel (bits)
- Size: 4 Nm or 5 Nm preset, 1/4 inch bit drive
- Length: 4 Nm 52 x 78 x 23 mm, 5 Nm 80 x 65 x 23 mm, bits 25 mm
- Extras: weight 4 Nm 72 g, 5 Nm 98 g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
