Blackburn "Chamber Tubeless" Floor Pump
-
Weight : 3.15kg / 6.94lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 36122
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Blackburn "Chamber Tubeless" Floor Pump is the floor pump for seating tubeless tyres without a compressor: set the switch to charge, pump the chamber to 3.4 bar, flip the switch, and all that air floods the tyre at once. Then you bypass the chamber and pump normally, read the pressure on the 2.75 inch top-mounted gauge and fine tune it with the bleed button on the Anyvalve head.
Facts: Blackburn "Chamber Tubeless" Floor Pump
- Max. Pressure: charge chamber 3.4 bar (50 psi)
- Gauge: analogue, 2.75 inch, top-mounted
- Valve Fitting: Presta, Schrader, Dunlop (Anyvalve head)
- Base: steel
- Material: Aluminum
- Extras: two-position charge/inflate switch, air bleed button on the head, riser bar handle with grips, 31.8 mm stem clamp for a handlebar of your own
- Scope of Delivery: 1 floor pump
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
