Burgtec Crank Bolt for Shimano Hollowtech II
-
Weight : 0.01kg / 0.02lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40920
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Burgtec Crank Bolt for Shimano Hollowtech II is the small preload bolt in the left arm of Shimano Hollowtech II cranks and on Shimano e-bike motors. It takes an 8 mm Allen key instead of the special tool and comes in Burgtec's anodised colours. It needs very little torque, 0.7 to 1.5 Nm maximum as specified by Shimano.
Facts: Burgtec Crank Bolt for Shimano Hollowtech II
- Contains: 1 x crank bolt
- Extras:
- 8 mm Allen key instead of a special tool
- torque 0.7 to 1.5 Nm
- fits Shimano Hollowtech II cranks (XTR, XT, SLX, Deore, Saint, Zee, LX) and cranks on Shimano e-bike motors
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
