Contec "TFM-210" Freewheel Remover
-
Weight : 0.09kg / 0.2lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 34250
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
Remover for BMX freewheel sprockets from Contec. The two-notch hardened steel fitting is pushed onto the sprocket of the removed rear wheel, a 24 mm open-end or ring spanner grips the outside, and the freewheel comes off anticlockwise.
Contec "TFM-210" Freewheel Remover is the tool you need as soon as a threaded freewheel has to come off, whether to replace it or to get at the hub.
Facts: Contec "TFM-210" Freewheel Remover
- Contains: 1x freewheel remover
- Material: hardened steel
- Compatibility: BMX freewheel sprockets with a two-notch fitting
- Extras:
- 24 mm spanner size
- blister packed
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
