Enduro Bearings "BRT-041" Blind Bearing Extraction Kit
- Weight : 0.25kg / 0.55lbs
- Packaging Unit: 1 Set
- Product ID (PID): 43809
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BRT-041" Blind Bearing Extraction Kit extends the BRT-060 bearing press and the blind pullers from BRT-222 or BRT-100: the puller grabs the bearing from the inside, and the press pulls it out in a controlled way against the spacer cups of the kit. According to the manufacturer ideal for freehubs and hubs that use bearing spacers instead of axle stops. Press and pullers are not included.
Facts: Enduro Bearings "BRT-041" Blind Bearing Extraction Kit
- Contains: 2 spacer cups and 1 adapter from the blind puller thread to the 5/16 inch ACME rod of the bearing press
- Compatibility: bearing press BRT-060, blind pullers from BRT-222 or BRT-100 (both not included)
- Extras:
- use per manufacturer: pulling bearings from freehubs and hubs with bearing spacers instead of axle stops
- Enduro part number BRT-041
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
