Enduro Bearings "MR 18287" Bearing - 18 x 28 x 7 mm
- Weight : 0.02kg / 0.04lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43801
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "MR 18287" Bearing - 18 x 28 x 7 mm is a sealed deep groove ball bearing sized 18 x 28 x 7 mm (inner diameter x outer diameter x width). Enduro Bearings builds its bearings with races as deep as possible and the largest possible balls, plus dual lip seals that form a labyrinth in a groove of the inner race and keep water and dirt out. The manufacturer names as use: hubs, suspension pivots.
Facts: Enduro Bearings "MR 18287" Bearing - 18 x 28 x 7 mm
- Bearing Size: MR 18287 (18 x 28 x 7 mm)
- Version: LLB ABEC 3
- Seal: LLB (light contact dual lip labyrinth seal)
- Material: 52100 chromium steel (races and balls)
- Fits: hubs, suspension pivots
- Contains: 1 piece
- Extras: deep groove races with the largest possible balls, 90 % grease fill, for suspension pivots the manufacturer recommends the MAX version, static load rating per manufacturer 2.02 kN, weight per manufacturer 15.1 g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
