Fit Bike Co. "STR" 2026 BMX Bike - Flat Black
-
Weight : 12.85kg / 28.33lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 32194
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Fit Bike Co. "STR" 2026 BMX Bike - Flat Black is a BMX complete bike built specifically for street riding, featuring a 4130 CrMo frame and a CrMo fork with a short 25mm offset and peg cuts for the demands of everyday street use. It comes equipped with a 4-piece handlebar, flangeless CrossFIT grips, four steel pegs, a sealed Mid BB bottom bracket and a sealed integrated headset, all dialled in for street performance. With the Fit Bike Co. "STR" 2026 BMX Bike - Flat Black you get a ride-ready setup with a short rear end, high standover and a steep geometry that is ready to go straight out of the box without cutting corners where it counts.
Facts: Fit Bike Co. "STR" 2026 BMX Bike - Flat Black
- Wheel Size: 20"
- BMX Frame: Fit Bike Co. STR, 4130 CrMo top tube, down tube and head tube, double gussets, removable brake mounts, integrated seat clamp, Mid BB
- Frame-Geometry:
- Top Tube (TT): 20.75"
- Chain Stay (CS): 12.6"
- Head Angle (HA): 75.5°
- Seat Angle (SA): 71°
- BB Height (BB): 11.8"
- Standover (SO): 8.8" - BMX Fork: Fit Bike Co. STR, 4130 CrMo steerer tube, tapered fork legs, 25mm offset, peg cuts
- BMX Bar:
- 4-piece, 4130 CrMo
- Height: 9"
- Width: 29"
- Backsweep: 12°
- Upsweep: 3° - Grips: FIT "Crossfit", flangeless
- Stem: FIT "Forged", top load, 50mm reach
- Headset: Integrated, sealed bearing, 1-1/8"
- Brake Lever: 2-finger
- Brake (rear):
- U-Brake
- Brake cable: Linear - Seat: Seat combo (seat/post)
- Seat Clamp: Integrated
- Pedals: FIT, plastic
- Chain: KMC "S1"
- Sprocket: FIT "Key", 25T
- Crank: Tubular 4130 CrMo, 165mm, RHD
- Bottom Bracket: Mid BB, sealed bearing
- Hub (front): Sealed bearing, 10mm axle, 17mm axle nuts, 36H
- Hub (rear):
- Cassette hub, sealed bearing, 14mm axle, RHD, 17mm axle nuts, 36H, 9T
- Drivetrain: 25/9, RHD - Rim (front): FIT "S1W", aluminium, 36H
- Rim (rear): FIT "OEM", aluminium, double wall, 36H
- Tire (front): FIT "F/U" BMX tyre, 20" x 2.4"
- Tire (rear): FIT "F/U" BMX tyre, 20" x 2.4"
- Delivery: The BMX bike is delivered pre-assembled in a box. Only the handlebar, front wheel, pedals and seat need to be attached for final assembly. Tools not included.
- Usage: BMX Freestyle, designed for street riding, tricks and fun at the skatepark.
