FOX "Transfer Neo Factory" Dropper Seatpost - 31.6mm
- Weight : 0.8kg / 1.76lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 41197
- Product safety
Weight
Source: BMX Glossary
Printed: 11/17/2026
The FOX "Transfer Neo Factory" Dropper Seatpost - 31.6mm is FOX's wireless dropper: lever and post talk over Neo, the radio protocol of the Live Valve Neo shocks, so there is no cable to the bar. This one is for 31.6 mm seat tubes with 100 mm of drop and a Kashima coated upper tube. A coreless 7 V motor with steel planetary gears turns a lever press into post movement in 26 milliseconds, and FOX quotes 30 to 40 hours per charge from a battery that also fits the Live Valve Neo shocks. Remote lever, battery and charging dock are included, setup runs through the FOX app.
Facts: FOX "Transfer Neo Factory" Dropper Seatpost - 31.6mm
- Seatsystem: Rail
- Diameter: 31.6mm
- Travel: 100mm or 225mm
- Length: 310.8 mm overall, 163.7 mm maximum insertion and 147.1 mm minimum exposed at 100 mm travel, 587.0 mm overall, 315.7 mm maximum insertion and 271.4 mm minimum exposed at 225 mm travel (FOX user spec 2027)
- Actuation: wireless (FOX Neo), remote lever included
- Weight: from 528 g (manufacturer figure for Transfer Neo Factory 30.9 mm / 100 mm), heavier with 225 mm travel
- Scope of Delivery:
- 1 wireless dropper seatpost
- 1 wireless remote lever
- battery, charging dock and USB-A to USB-C cable - Extras:
- FOX specific lithium battery, interchangeable with Live Valve Neo shocks, 30 to 40 hours per charge, 1.25 to 1.5 hours charge time
- coreless 7 V motor with steel planetary gears, 26 ms from lever press to post movement
- shake to wake: turns on when the bike moves, sleeps after 5 minutes of inactivity
- LED battery indicator when inserted, manual actuation if the lever battery is dead
- IPX7 waterproof
- controller 28 mm tall, 47 mm stack, 11 mm more than the cable actuated Transfer
- air pressure via Schrader valve at the post head (275-325 psi)
- service interval 8,000 actuations, dust wiper removable for re-greasing
- fits Ø 7 mm and 7 x 9 mm oval rails, not 8 mm rails
- saddle clamp bolts 5.1 Nm, seatpost binder max. 5.1 Nm
- minimum insertion 80 mm at 100 mm travel, 150 mm at 225 mm travel, follow the frame maker's minimum, use assembly paste on carbon frames
- Factory with Kashima coated upper tube
- FOX part number 925-01-257 (100 mm) / 925-01-356 (225 mm)
Customer reviews
No review yet. You bought this product from us? Tell other riders what it is like.

















