FOX "Transfer SL Factory" Dropper Seatpost - 30.9mm
-
Weight : 0.5kg / 1.10lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 41322
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The FOX "Transfer SL Factory" Dropper Seatpost - 30.9mm is FOX's lightweight dropper for XC and trail: up to 167 g lighter than the Transfer and built with two positions, so it sits either fully up or fully down. This one is for 30.9 mm seat tubes with 75 or 100 mm of drop, with a Kashima coated upper tube. At 355 or 380 mm overall and 225 mm maximum insertion it also fits short seat tubes. It is cable actuated, the remote lever is not included.
Facts: FOX "Transfer SL Factory" Dropper Seatpost - 30.9mm
- Seatsystem: Rail
- Diameter: 30.9mm
- Travel: 100mm or 75mm, two positions (fully extended or fully dropped)
- Length: 355 mm overall with 130 mm exposed above the seal head at 75 mm travel, 380 mm overall with 155 mm exposed at 100 mm travel, 225 mm maximum insertion for both (FOX user spec Transfer SL 75-150, ridefox.com)
- Actuation: cable; remote lever sold separately (under-bar 1x lever or classic 2x lever)
- Weight: from 342 g (manufacturer figure for 30.9 mm / 75 mm), 347 g with 100 mm travel
- Scope of Delivery:
- 1 dropper seatpost
- WITHOUT remote lever - Extras:
- up to 167 g lighter than the Transfer
- Factory with Kashima coated upper tube and titanium hardware (10 g lighter)
- brazed-on cable end, can sit at the lever or at the post, cable clamp bolt 2.8 Nm
- fits Ø 7 mm (steel/titanium) and 7 x 9 mm oval (carbon) rails, not 8 mm rails
- saddle clamp bolts 5.1 Nm, seatpost binder max. 5.1 Nm
- minimum insertion 80 mm, follow the frame maker's minimum, use assembly paste on carbon frames
- FOX part number 925-01-220 (75 mm) / 925-01-221 (100 mm)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
