FOX "Transfer SL Factory" Dropper Seatpost - 27.2mm
-
Weight : 0.5kg / 1.10lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 42283
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The FOX "Transfer SL Factory" Dropper Seatpost - 27.2mm is FOX's lightweight dropper for XC, trail and gravel: up to 167 g lighter than the Transfer and built with two positions, so it sits either fully up or fully down. This one is for 27.2 mm seat tubes with 50 mm of drop, with a Kashima coated upper tube. It is 350 mm long overall and inserts up to 248 mm into the seat tube, 80 mm at minimum. It is cable actuated, the remote lever is not included.
Facts: FOX "Transfer SL Factory" Dropper Seatpost - 27.2mm
- Seatsystem: Rail
- Diameter: 27.2mm
- Travel: 50mm, two positions (fully extended or fully dropped)
- Length: 350 mm overall, 248 mm maximum insertion, 102 mm exposed above the seal head (ridefox.com, Transfer SL 27.2 x 50 mm)
- Actuation: cable; remote lever sold separately (under-bar 1x lever or classic 2x lever)
- Weight: from 327 g (manufacturer figure for 27.2 mm / 50 mm)
- Scope of Delivery:
- 1 dropper seatpost
- WITHOUT remote lever - Extras:
- up to 167 g lighter than the Transfer
- Factory with Kashima coated upper tube and titanium hardware (10 g lighter)
- brazed-on cable end, can sit at the lever or at the post, cable clamp bolt 2.8 Nm
- fits Ø 7 mm (steel/titanium) and 7 x 9 mm oval (carbon) rails, not 8 mm rails
- saddle clamp bolts 5.1 Nm, seatpost binder max. 5.1 Nm
- minimum insertion 80 mm, follow the frame maker's minimum, use assembly paste on carbon frames
- FOX part number 925-01-201
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
