Ikon "Ultralite" BMX Race Rim - 24 Inch (507) - 36H - V-Brake
- Weight : 0.4kg / 0.88lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 45112
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/ikon-ultralite-bmx-race-rim-24-inch-507-36h-v-brake-p-45112
Printed: 10/29/2026
Printed: 10/29/2026
The Ikon "Ultralite" BMX Race Rim - 24 Inch (507) - 36H - V-Brake is Ikon's aluminum rim for BMX race wheels with a 507mm bead seat diameter, for 24 x 1.50" and 24 x 1.75" tires, with 36 holes. It is a 6061-T6 aluminum double wall rim, double polished and black anodized, and the water transfer Ultralite graphic comes in four colors. The spoke holes are slightly angled so the spoke runs straighter into the nipple and the wheel ends up stiffer.
This is the rear profile with a CNC machined brake track for V-brakes.
The rim is tubeless ready: with tubeless rim tape, a tubeless valve, sealant and a tubeless tire you can run it without a tube.
Ikon recommends at most 7.58 bar (110 psi) and a spoke tension up to 115 kgf.
Facts: Ikon "Ultralite" BMX Race Rim - 24 Inch (507) - 36H - V-Brake
- Wheel Size: 24"
- Material: 6061-T6 aluminum, double wall, black anodized
- Holes: 36H
- Width: 28mm
- Height (Rim Wall): 18.8mm
- ETRTO ⌀: 507mm
- ERD: 487mm
- Rim Wall: CNC machined brake track (compatible with V-brakes), rear profile
- Valve Hole Diameter: for Presta valves
- Extras: for 24 x 1.50" and 24 x 1.75" tires, tubeless ready, slightly angled spoke holes, max. 7.58 bar (110 psi), spoke tension up to 115 kgf
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
