JRC Components "Ridge Headset Mount" Computer Mount - Garmin
-
Weight : 0.03kg / 0.07lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40147
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The JRC Components "Ridge Headset Mount" Computer Mount - Garmin carries the Garmin Edge directly above the headset instead of in front of the bar. JRC built it for trail and gravel riding: the body is CNC machined from 6061-T6 aluminium and anodised, the insert is polymer resin, bolt and grub screw are stainless steel. It goes onto a 1 1/8 inch steerer with a standard top cap setup in place of the headset spacers at the height you want; it stacks 7 mm on the steerer, and a 10 mm rise leaves room for the device even under the shortest enduro stems. The angle adjusts up to 45 degrees up or down from horizontal and is held by a second grub screw on the left side, so it stays put on rough ground. Fits the Garmin Edge models from the Edge 20 up to the Edge 1050 and the Edge Explore. 30 g, in nine anodised colours.
Facts: JRC Components "Ridge Headset Mount" Computer Mount - Garmin
- Type: Stem Mount
- Fits: Garmin Edge 20, 25, 130, 200, 500, 510, 520, 530, 540, 800, 810, 820, 830, 840, 1000, 1030, 1030 Plus, 1040, 1040 Solar, Edge Explore, Edge Explore 2, Edge 1050
- Material: 6061-T6 aluminium, CNC machined, anodised; polymer resin insert; stainless steel bolt and grub screw
- Mounting: on the 1 1/8 inch steerer in place of headset spacers, for a standard top cap setup
- Handlebar Diameter: independent of the handlebar
- Extras:
- 7 mm stack on the steerer, 10 mm rise
- angle adjustable up to 45 degrees, locked by a second grub screw
- colour black, blue, gold, gun metal, lime-green, orange, purple, red or silver
- JRC part no. CMA-0100 - Scope of Delivery: 1 mount
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
