Leatt "MTB 2.0 Endurance" Jacket - Peanut
-
Weight : 0.4kg / 0.88lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40369
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Leatt "MTB 2.0 Endurance" Jacket - Peanut is a super lightweight wind jacket for rides and training: the highly elastic nylon/elastane ripstop with 360° stretch is windproof by construction, without a laminate, so it stays breathable. The PFC-free DWR C0 coating repels dirt and water, and knitted mesh panels on the back and in the armpits add targeted ventilation. The ergonomic cut suits an aggressive to semi-aggressive riding position, and the extended back carries a gripper print. The jacket packs into its back pocket and straps to the bike with a storage loop, while reflective prints front and back add visibility.
Facts: Leatt "MTB 2.0 Endurance" Jacket - Peanut
- Material: 91% polyester, 9% elastane (ripstop with 360° stretch)
- Hood: No
- Weather protection: Windproof by fabric construction (no laminate), dirt and water repellent (PFC-free DWR C0)
- Fit: Ergonomic cut for aggressive to semi-aggressive riding position, extended back
- Extras:
- Super lightweight, highly elastic nylon/elastane fabric
- Knitted mesh panels on the back and in the armpits
- Pre-shaped cuffs, stretch on sleeves and hem
- Low collar with soft inner face
- Gripper print on the back
- Zipped lower back pocket
- Packs into its back pocket, storage loop for the bike
- Seamlessly welded front zip with inner flap
- Reflective print details front and back
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
