Loctite "2701" Threadlocker - 10ml
-
Weight : 0.04kg / 0.09lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 34355
Found an error? Report it. 5 EUR voucher if confirmed.
Loctite "2701" Threadlocker - 10ml is the high strength Loctite in the 10 ml bottle. It belongs on joints that are meant to stay put and that nobody intends to open again: it resists vibration and impact far better than a medium strength threadlocker, but will not release without heat. Dismantling means warming the bolt to around 250 degrees. For bolts you expect to undo again, the medium strength 243 is the right choice.
Facts: Loctite "2701" Threadlocker - 10ml
- Strength: high strength, breakaway torque 38 Nm on M10
- Contains: 1 bottle, 10 ml
- Colour: green
- Area of Application: threaded joints in metal, especially chrome plated and galvanised surfaces
- Temperature Range: -55 to +150 degrees Celsius
- Extras:
- low viscosity, methacrylate based
- seals through threads at the same time
- heat to around 250 degrees Celsius to dismantle
- fluoresces under UV light
- hand strength on steel after 10 minutes
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
