MOTIP "Cycling Carbon Grip" Assembly Spray - 400ml
- Weight : 0.35kg / 0.77lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 34282
- Product safety
- Note hazard information
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/motip-cycling-carbon-grip-assembly-spray-400ml-p-34282
Printed: 10/20/2026
Printed: 10/20/2026
The MOTIP "Cycling Carbon Grip" Assembly Spray - 400ml is an assembly aid for carbon components. The combination of lithium grease and quartz particles increases the grip between the parts and makes fitting a carbon seatpost, stem or handlebar easier. The film is water repellent and weather resistant and the jet is directed. The surface has to be clean, dry and free of grease before you apply it.
Facts: MOTIP "Cycling Carbon Grip" Assembly Spray - 400ml
- Contains: 400ml
- Area of Application: fitting carbon components
- Extras:
- lithium grease with quartz particles
- excellent grip
- water repellent and weather resistant
- directed jet
Hazard information
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: may burst if heated.
- H315 Causes skin irritation.
- H336 May cause drowsiness or dizziness.
- H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after use.
- P260 Do not breathe dust/fume/spray.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
- P501 Dispose of contents/container to an approved waste disposal plant.
