MOTIP "Cycling Tyre Repair" Puncture Spray - 75ml
- Weight : 0.1kg / 0.22lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 34283
- Product safety
- Note hazard information
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The MOTIP "Cycling Tyre Repair" Puncture Spray - 75ml is a rubber based puncture spray for an emergency repair on the road. It seals small holes in the tyre and inflates it at the same time, without taking the tyre off the rim. The adapter hose on the head fits Schrader and Dunlop valves. After filling, ride for about ten minutes so the sealant spreads evenly, then let the propellant out and inflate the tyre again. Tell the workshop about it if you have the tyre repaired later.
Facts: MOTIP "Cycling Tyre Repair" Puncture Spray - 75ml
- Contains: 75ml aerosol, adapter hose included
- Extras:
- rubber based
- for Schrader (AV) and Dunlop (DV) valves
- emergency repair without taking the tyre off
- for small holes in the tyre
Hazard information
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: may burst if heated.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after use.
- P260 Do not breathe dust/fume/spray.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
- P501 Dispose of contents/container to an approved waste disposal plant.
