Park Tool "BTS-1" Bottom Bracket Tapping and Facing Set - BSA
- Weight : 3.18kg / 7.01lbs
- Packaging Unit: 1 Set
- Product ID (PID): 44672
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/park-tool-bts-1-bottom-bracket-tapping-and-facing-set-bsa-p-44672
Printed: 10/30/2026
Printed: 10/30/2026
The Park Tool "BTS-1" Bottom Bracket Tapping and Facing Set - BSA ensures threaded BSA bottom bracket shells are properly aligned and faced. The two-piece tap handle engages through the shell and keeps both sides aligned with each other; the taps verify and repair the threads and then guide the facing cutter perfectly square to the bottom bracket axis.
Facts: Park Tool "BTS-1" Bottom Bracket Tapping and Facing Set - BSA
- Contains:
- 1 two-piece tap handle
- 1 tap 1.370" x 24 TPI right hand, non-drive side (691)
- 1 tap 1.370" x 24 TPI left hand, drive side (692)
- 1 facing cutter 45 mm (690) - Compatibility: BSA bottom bracket shells (English, BSC, ISO); optional Italian taps 693 (2 required) and 690-XL facer
- Extras:
- Park Tool recommends cutting fluid such as CF-2 when machining
- manufacturer part number BTS-1
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
