Park Tool "CWP-7" Crank Puller
-
Weight : 0.5kg / 1.10lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 28023
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Park Tool "CWP-7" Crank Puller
is suitable for BNI cranks on Bosch® e-bikes, including both square-taper and splined cranks (ISIS Drive™, Octalink®). The
Park Tool "CWP-7" Crank Puller
can be used with a 15mm open-end wrench or a 15mm socket.
Facts: Park Tool "CWP-7" Crank Puller
- Contents: 1x crank puller tool
- Material: Steel
- Extras: Features a 22mm x 1mm thread, fits BNI cranks on Bosch® e-bikes, both square taper and toothed (ISIS Drive™, Octalink®), 15mm nut für spanner
