Reverse Components "Black One" MTB Rear Wheel - 29" Inch
-
Weight : 1.26kg / 2.78lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33109
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "Black One" MTB Rear Wheel - 29" Inch is the 29 inch rear wheel of the Black One line. The 6069-T6 aluminium rim is 30 mm wide inside, its seam is pinned and sealed, and tubeless tape and valve are included. Two hub platforms are offered: the Reverse Base on 12 x 148 mm Boost with six pawls and a choice of Shimano HG, Shimano Microspline or SRAM XD freehub body, and the Reverse DH-7 EFS on 12 x 150 mm or 12 x 157 mm with a short freehub body for 7-speed cassettes. Pick the version you need above.
Facts: Reverse Components "Black One" MTB Rear Wheel - 29" Inch
- Wheel Size: 29"
- Version: Base 12 x 148 mm Boost Shimano HG, Base 12 x 148 mm Boost Shimano Microspline, Base 12 x 148 mm Boost SRAM XD, EFS 12 x 150 mm Shimano DH7 or EFS 12 x 157 mm Shimano DH7
- Rim: Reverse Black One, aluminium 6069-T6
- Rim Width: 35mm outer, 30mm inner
- Rim Height: 21.8mm
- Rim Seam: pinned and sealed
- Holes: 32H, without eyelets
- Valve Hole: for Presta valve
- Hub:
- Reverse Base 12 x 148mm Boost: 6 pawls, steel axle, 4 sealed bearings, 344g
- Reverse DH-7 EFS 12 x 150mm and 12 x 157mm: 4 sealed bearings, short freehub body for 7-speed cassettes, 430g - Hub Bearings: sealed (SB)
- Spokes: Sapim Race, stainless steel, black
- Spoke Nipples: Sapim Secure Lock, brass
- Lacing: 3-cross
- Disc Mount: 6-bolt
- Weight:
- Reverse Base 12 x 148mm Boost: 1140g
- Reverse DH-7 EFS: 1260g - Intended Use: trail to enduro and light downhill
- Scope of Delivery: 1 wheel, tubeless tape, tubeless valve
- Extras:
- tubeless ready
- ERD 595mm
- rim weight 549g
- silver rim with black decals, grey version with grey decals
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
