Reverse Components "DH Angle Spacer" MTB Headset Spacer
-
Weight : 0.07kg / 0.15lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33157
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "DH Angle Spacer" MTB Headset Spacer slackens the head angle by half a degree and, at 61 mm outer diameter, is wider than the standard angle spacer with its 51 mm. It replaces the crown race and is pressed onto the fork crown in its place. It works with any headset running 45 degree bearings and with 1 1/8 inch steerer forks.
Facts: Reverse Components "DH Angle Spacer" MTB Headset Spacer
- Contains: 1 angle spacer
- Material: Aluminum
- Size: 1-1/8" (Ø28.6mm), outer diameter 61 mm, height 10 mm
- Extras: slackens the head angle by 0.5 degrees, replaces the crown race, for headsets with 45 degree bearings, 61 g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
