Reverse Components "easyLOOP" Lift Adapter
-
Weight : 0.02kg / 0.04lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33168
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "easyLOOP" Lift Adapter goes onto the steerer tube in place of a spacer and gives the lift hook of the easyLOOP system a fixed seat. On downhill bikes with a dual crown fork you hang above the fork bridge, on a standard stem above or below it. It is mainly needed on stems without a notch between the two clamp bolts, where the lift hook otherwise finds no secure seat.
Facts: Reverse Components "easyLOOP" Lift Adapter
- Type: adapter for the easyLOOP lift hook, mounted in place of a spacer
- Material: Aluminum
- Fits: 1 1/8 inch steerer tubes (Ø28.6mm)
- Contains: 1 lift adapter
- Extras: 21 g, mounts above the fork bridge on a downhill bike or above and below the stem
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
