Reverse Components "SeatSwitch V2" Saddle Angle Adjuster
-
Weight : 0.25kg / 0.55lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33077
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "SeatSwitch V2" Saddle Angle Adjuster sits between seat post and saddle and tips the nose down by 6 degrees at the flick of a lever. Climbing, that rotates your pelvis further forward, spreads the pressure differently and puts you in a position that is far more comfortable over long ascents. At the top you flip the lever back and ride on with your usual saddle angle. Depending on the base setup it can also be mounted the other way round so the nose is raised out of neutral instead. Version 2 has a reworked mud cover, a revised clamp ring and black bolts on the seat clip.
Facts: Reverse Components "SeatSwitch V2" Saddle Angle Adjuster
- Type: Type 1
- Material: aluminium, steel
- Fits: seat post heads of type 1, round saddle rails Ø7mm
- Dimensions:
- stack height: +23 mm
- angle adjustment: 6 degrees in 2 positions
- required clearance from rail centre to saddle underside: at least 25 mm - Contains: 1 saddle angle adjuster
- Extras: two bolt clamping, mud cover, check the manufacturer compatibility list before buying
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
