Ryde "Andra 25 R" MTB Rim - 29" Inch
- Weight : 0.9kg / 1.98lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 47028
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/ryde-andra-25-r-mtb-rim-29-inch-p-47028
Printed: 11/17/2026
Printed: 11/17/2026
The Ryde "Andra 25 R" MTB Rim - 29" Inch is the reinforced version of the Andra 25 in 29 inch (622): a pinned double wall rim made of 6063-T6 aluminium, black powder coated, 25mm internal width for tyres from 29 to 71mm, built for a 150kg axle load instead of 120kg and 1400N spoke tension. The nipple bed is thick and internally reinforced, the spoke holes are drilled 8 degrees radially and 2 degrees axially towards the hub, the valve hole is 8.5mm. It is not tubeless ready and runs with a tube. Ryde lists disc brake as the brake type and recommends it for speed pedelecs and e-cargo bikes. With 32 or 36 holes for 29 inch wheels that have to carry a lot.
Facts: Ryde "Andra 25 R" MTB Rim - 29" Inch
- Wheel Size: 29"
- Material: 6063-T6 aluminium, double wall, powder coated
- Seam: Pinned
- Holes: 32H or 36H
- Width: 25mm internal, 31.2mm external
- Height (Rim Wall): 21mm
- Rim Wall: for disc brakes (maker figure)
- Valve Hole Diameter: 8.5mm for Schrader and Dunlop valves
- Contains: 1 rim
- Extras:
- not tubeless ready, for tube tyres
- hooked rim (crotchet)
- no eyelets, internally reinforced nipple bed
- French drilling pattern (staggered holes)
- spoke holes drilled 8° radial and 2° axial, 2mm zig zag offset
- max. spoke tension 1400N
- recommended tyre width 29mm to 71mm
- axle load up to 150kg
- ERD 596mm (maker figure)
- developed by Ryde for speed pedelecs and e-cargo bikes
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
Customer reviews
No review yet. You bought this product from us? Tell other riders what it is like.





